Produktinformationen "Rapier-Begleitdolch, 16. Jh., mit Lederscheide" Rapier-Begleitdolch, 16. Jh, mit LederscheideSchöne Rekonstruktion eines Renaissance-Dolches, wie er oft zusammen mit einem Rapier eingesetzt wurde. Aufwendig gestaltete Griffpartie mit typischer, nach vorne gebogener Parierstange und Griff aus poliertem Rinderknochen. Details:- Material: Karbonstahl - Gesamtlänge: ca. 44 cm - Klingenlänge: ca. 27cm - Max. Klingenbreite: ca. 3,2 cm Bitte beachte: Der Verkauf dieses Artikels erfolgt nur an Personen über 18 Jahre. Bitte gib deshalb Dein Geburtsdatum in unserem Bestellformular an. Zusätzlich benötigen wir eine Kopie Deines Personalausweises, Führerscheins o.ä. per E-Mail, Scan, Fax oder Post.Hersteller: Battle-Merchant Wacken GmbH & Co. KG, Gehrn 4, 25596 Wacken Kontakt: info@battlemerchant.comSicherheitshinweis:- Das Produkt kann scharfe Schnittkanten aufweisen. Unsachgemäßer oder unvorsichtiger Gebrauch kann zu Verletzungen führen.

Für unseren Klassiker, den Stiefeldolch gibt es hier die passende Lederscheide mit Gürtelschlaufe, damit man den Dolch auch am Gürtel tragen kann. Material: 3mm starkes Rindsleder Gesamtlänge: 17,5cm Größe der Gürtellasche: ca 4cm Sicherheitshinweis:- Das Produkt kann scharfe Schnittkanten aufweisen. Unsachgemäßer oder unvorsichtiger Gebrauch kann zu Verletzungen führen.

Celtic  North Grimston, Marto A striking and rare from the Iron Age with a human figure on the hilt, which was discovered by chance during earthworks near North Grimston in 1902. It is one of the few specimens with human figures found in Celtic Europe. This dagger was inspired by the sword from North Grimston. Marto from Toledo/Spain has included this special dagger as a reproduction in his "Historic, Fantastic and Legend Swords" series. Details: - Material blade: stainless steel AISI 420 - Material handle: Zamak - Total length: 43 cm - Weight: 300 g - Manufacturer's product no.: 705 Please note: We do not sell this product to customers under the age of 18. Please provide your birth date when ordering. We'll also need a copy of your ID-card or passport by email, scan, fax or mail.Manufacturer: Battle-Merchant Wacken GmbH & Co. KG, Gehrn 4, 25596 Wacken Contact: info@battlemerchant.com Safety note: - Product may have sharp cutting edges. Improper or careless use can lead to injuries.

Celtic with bronze hilt This Celtic dagger features an unsharpened spring steel blade and an anthropomorphic hilt made of bronze. This type of grip wastypical of Celtic in the 1st century B.C. Delivery includes a leather scabbard. Details: - Blade material: spring steel EN45 - Grip material: bronze - Overall length: approx. 52 cm - Blade length: approx. 38.5 cm - Including matching leather sheath - Weight without sheath: 900 g Please note: We do not sell this product to customers under the age of 18. Please provide your birth date when ordering. We'll also need a copy of your ID-card or passport by email, scan, fax or mail.Manufacturer: Battle-Merchant Wacken GmbH & Co. KG, Gehrn 4, 25596 Wacken Contact: info@battlemerchant.com Safety note: - Product may have sharp cutting edges. Improper or careless use can lead to injuries.

Der neue Colichemarde Dolch aus dem Hause Cold Steel hat eine Gesamtlänge von ca. 45 cm. Der Dolch wurde aus 1055 Karbonstahl hergestellt. Eine Lederscheide mit Stahlbeschlägen ist im Lieferumfang enthalten. Das Colichemarde Schwert erschien erstmals im späten 16. Jahrhundert während des Rückganges des Rapiers und des Aufstieges des kleinen Schwertes. Seine einzigartig geformte Klinge war extra stark und breit und wurde nach unten hin schmaler, wo sie in einer bösartigen Spitze endete. Der Vorteil dieser Anordnung war, dass man mit diesem Schwert auch die schwersten Waffen parieren konnte ohne dass es zerbrach, während es leicht genug war, es blitzschnell einzusetzen. Cold Steel´s Präsident Lynn C. Thompson ist seit langem ein Bewunderer des Colichemarde, aufgrund seiner Vielseitigkeit im Angriff und der Verteidigung. So wurde Dave Baker nach einer eigenen, modernen Interpretation gefragt. Getreu dem Vorbild, wurde das Schwert extra lang und breit konzipiert, sich plötzlich nach unten verjüngend, endend in einer tödlichen Spitze. Das Heft bietet eine dekorative, aber dennoch höchst funktionale Doppel-Schutz Parierstange, komplett mit Finger-Schlaufen und Knöchelbogen, während der Griff komplett mit Draht umwickelt ist und von einem passenden Knauf begrenzt wird. Darüber hinaus hat Cold Steel sich die Freiheit genommen, diesen passenden Dolch mit seiner steifen, mit Draht umwickelten, polierten Klinge zu entwerfen, ausgestattet mit schützenden, doppelten Draht Quillions. Dieser Dolch passt zum Colichemarde Schwert Details: Gewicht: ca. 326 g Gesamtlänge: ca. 45 cm Klingenlänge: ca. 29,85 cm Klingenmaterial: 1055 Karbonstahl Grifflänge: ca. 15 cm Scheide: Lederscheide mit Stahlbeschlägen Die Abgabe dieses Artikels an Personen unter 18 Jahre ist nicht zulässig. Wir benötigen daher einen Altersnachweis per E-Mail oder Brief. Sicherheitshinweis:- Das Produkt kann scharfe Schnittkanten aufweisen. Unsachgemäßer oder unvorsichtiger Gebrauch kann zu Verletzungen führen.

Crusader Dagger with scabbard, practical blunt These were mostly used as a secondary by knights, unmounted mercenaries and archers, and upon the pommel of this dagger is a cross on both sides (the sign of the crusaders). The blade of our replica is forged from spring steel and goes through to the round cast iron pommel, where it is screwed invisibly. The handle is wrapped in leather and braided wire. The dagger also has a solid crossguard. The blade is hardened to approx. 48 HRC in oil. The dagger has a deep, rather long groove. The tip is rounded and it’s edges are unsharpened. The dagger is therefore suitable for light exhibition combat. A matching wooden sheath covered with leather is included.  Details: - Battle-ready Category : SK-C   Learn more about our - Blade material: Spring steel EN45 - Rockwell Hardness: approx. 48 HRC - Overall: approx. 44 cm - Blade length: approx. 29 cm - Blade width: approx. 31 mm - Including scabbard made of wood and leather - Battle ready version, also available as a decorative version (Art nr. 0216347518) - Weight (without scabbard): approx. 540 g

Boabdil, MartoAbu Abdallah Muhammad XII (c. 1460 - c. 1533), known to the Castilians as Boabdil, was the twenty-second and last Nasrid ruler of Granada in Iberia. Son of Abu l-Hasan Ali, sultan of the Emirate of Granada, Muhammad succeeded him in 1482 Muhammad XII soon after sought to gain prestige by invading Castile. He was taken prisoner at Lucena in 1483. Meanwhile, his father returned to power and then in 1485, his uncle Muhammed XIII, also known as Abdullah ez Zagal. He only obtained his freedom and support to recover his throne in 1487 by consenting to hold Granada as a tributary kingdom under the Catholic monarchs and not to intervene in the Siege of Málaga (1487), in which Málaga was taken by the Christians. By the beginning of 1491, Granada was the only Muslim-governed city in Spain. Details: - Overall length: approx. 43 cm - Blade material: Stainless steel - Weight: approx. 0,7 kg - Manufacturer's product no.: 736Manufacturer: Battle-Merchant Wacken GmbH & Co. KG, Gehrn 4, 25596 Wacken Contact: info@battlemerchant.com Safety note: - Product may have sharp cutting edges. Improper or careless use can lead to injuries.

Excalibur , MartoKing Arthur’s history and legend is intimately linked to the magic and mysterious Excalibur. As Merlin the wizard has proclaimed, only the one able to take the sword out of the stone would be the king. Arthur, knelt in front of the stone fulfilled this deed, took the sword, went with it to the cathedral and offered it in the altar. Arthur was anointed with the Sacred Oil and, in presence of all the barons and common people, he solemnly swore to be a fair king and to defend Truth and Justice all the days of his life. Legend and history were mixed through time and King Arthur’s legend, The Knights of the Round Table and the magic sword Excalibur have intertwined along the way. Details: - Overall length: approx. 40 cm - Blade material: Stainless steel - Weight: approx. 0,9 kg - Manufacturer's product no.: 732Manufacturer: Battle-Merchant Wacken GmbH & Co. KG, Gehrn 4, 25596 Wacken Contact: info@battlemerchant.com Safety note: - Product may have sharp cutting edges. Improper or careless use can lead to injuries.

Faithkeeper , Windlass The main driving force behind the Order of the Knights Templar was faith. Faith in God, faith in their mission, and faith in each other. This dagger is a testament to these valiant knights. The finest metal-smiths at Windlass Steelcrafts have spent hours on each blade, hand-forging the high-carbon steel for optimal balance, quickness, and durability. Holding this dagger in your hand will leave no doubt that this magnificent could have defended the Holy Land. The genuine hand-wrapped leather grip and the hand-finished solid steel parts show just how tough and beautiful this dagger truly is. The pommel features a reversed inset image of the Signet of the Knights Templar, which can be used as a wax seal for any important missives (wax not included). The cross guard is inscribed on both sides with the Latin phrase Militum Xristi - Seal of the Soldiers of Christ. The high-carbon steel diamond cross-section blade and has a pierced cross of the Knights Templar at its ricasso. The dagger includes a custom, matching top-grain leather scabbard, which has a belt loop and locking stud to keep your weapon secure. This dagger is truly a must-have for any aficionado of Knights Templar history. This Dagger is a companion to the Faithkeeper . Includes matching leather scabbard. Made by Windlass Steelcrafts. This Dagger is designed as a collector’s or decoration/display piece. Besides its quality as a collectible, it is also perfectly suited as a prop, e.g. to complete your costume. Details: - Material: 1065 high carbon steel - Overall length: approx. 39.6 cm - Blade length: approx. 24.9 cm - Blade thickness: approx. 4.5 mm - Handle length: approx. 10 cm / 14.7 cm, with pommel - Max. Blade width: approx. 3.1 cm - Point of balance: approx. 2 cm (behind the guard) - Incl. scabbard made of genuine leather - Weight without scabbard: approx. 398 g - Weight with scabbard: approx. 498 g Please note: We do not sell this product to customers under the age of 18. Please provide your birth date when ordering. We'll also need a copy of your ID-card or passport by email, scan, fax or mail. Manufacturer: Battle-Merchant Wacken GmbH & Co. KG, Gehrn 4, 25596 Wacken Contact: info@battlemerchant.com Safety note: - Product may have sharp cutting edges. Improper or careless use can lead to injuries.

French Dagger Pistol, 18th Century, Replica Decoration pistol with articulated mechanism – NOT FUNCTIONAL – Replica of a French dagger pistol from the 18th century. As the name implies, it is a dagger with a flintlock pistol mounted in its centre. This combination of dagger or knife and pocket pistol was back then already an oddity that was rather custom-made. In the Age of Sail, pistol / pistol knives were used by naval forces and pirates alike. Their dual function as a firearm and an edged melee made them particularly useful in close quarters combat. The grip of this beautiful dagger / muzzleloader replica with boxlock flintlock mechanism is made of resin in ivory look. Except for the blade, hammer and trigger, all metal elements (pommel, shell guard and barrel) have an antiqued brass finish. The blunt blade shows dark accents that imitate signs of wears. Our firearm replicas are solely intended for re-enactment and decorative purposes. Although the mechanism is fully articulated, this reproduction is not capable of firing. A beautiful item for every collection and an indispensable accessory for re-enactors. Details: - Material: resin (faux ivory), metal (partly antiqued brass finish) - Overall length: approx. 37 cm - Blade length: approx. 24.5 cm - Blade width at guard: approx. 3 cm - Guard length: approx. 9 cm - Weight: approx. 480 g Specs may slightly vary from piece to piece. Please note: We do not sell this product to customers under the age of 18. Please provide your birth date when ordering. We'll also need a copy of your ID-card or passport by email, scan, fax or mail. Manufacturer: Battle-Merchant Wacken GmbH & Co. KG, Gehrn 4, 25596 Wacken Contact: info@battlemerchant.com

Game Of Thrones / A Song of Ice and Fire - Night's Watch Dragonglass Set Officially licensed product from the Fantasy book series A Song of Ice and Fire by George R.R. Martin The Night's Watch Dagger is made from obsidian, a naturally occurring volcanic glass called "Dragonglass" in the fantasy epic Game of Thrones®. The baneful White Walkers can only be killed when struck with made of Valyrian steel or dragonglass. This exclusive, officially licensed Night's Watch Dragonglass Dagger Set was created from the fantasy world of author George R.R.Martin's best-selling saga A Song of Ice and Fire (adapted into HBO's hit TV series Game of Thrones®). Each piece in this highly collectible set was meticulously designed based on George R.R. Martin's extensive notes and descriptions. They all have been crafted with close attention to detail and no effort was spared to achieve the most possible authentic rendition of the items described in the source material. Strictly limited to 2500 pieces, each dagger is serialized (diamond-etched with an individual serial number) and comes with a certificate of authenticity personally autographed by George R.R. Martin. This set was designed as a "Beyond the Wall Survival Kit" issued to a ranger of the Night's Watch about to leave Castle Black to go on a mission. It includes: - 1 hand-crafted genuine obsidian dagger - 1 black leather sheath - 5 obsidian arrowheads - 1 black leather belt pouch - 1 map of Wildling territory - 1 letter from Jon Snow (written by GRRM) issuing your orders - 1 wooden storage box, approx. 15 x 30 cm Dagger's dimensions: - Overall length: approx. 26 cm - Blade length: approx. 14 cm Please note: We do not sell this product to customers under the age of 18. Please provide your birth date when ordering. We'll also need a copy of your ID-card or passport by email, scan, fax or mail.Manufacturer: Jalic Inc/Valyrian Steel, 2011, Dayton Blvd, USA-37415 Chattanooga, TN, chris@.jalic.com Person responsible: Battle-Merchant Wacken GmbH & Co. KG, Gehrn 4, 25596 Wacken Contact: info@battlemerchant.com Safety note: - Product may have sharp cutting edges. Improper or careless use can lead to injuries.

Game Of Thrones - Arya's Blade Officially licensed replica from HBO's hit TV series Game of Thrones® First seen in the hands of the assassin sent to kill Bran Stark, ownership of the knife was first attributed to Petyr Baelish and then to Tyrion Lannister. Catelyn Stark used this evidence to accuse and arrest Tyrion for her son’s attempted murder, which started the war between the Starks and Lannisters. Later it was glimpsed in a history text on the Targaryen family that Samwell Tarly read in The Citadel. The knife remained in Petyr Baelish’s possession for some time. Then after he traveled to Winterfell with the Knights of the Vale he gave it to Bran Stark as a gesture of goodwill since the knife had come so close to ending Bran’s life. Bran had no use for a and so passed it on to his sister, Arya. Arya incorporated the use of the knife into her normal fighting style and eventually used the knife to attack the Night King. As she plunged the Valyrian Steel blade into the Night King’s torso the power of the blade shattered the Night King, and with his death all of the other white walkers, and their army of wights, all perished as well through the magic that had connected them to their creator. Thus ending the war against the dead. This adult collectible is officially licensed from HBO®'s hit series Game of Thrones® is made of stainless steel, comes individually serialized, and includes a display and certificate of authenticity. Details: - Blade material: Stainless steel - Handle material: "dragon bone" grip with 24k gold plated metal parts - Overall length: approx. 49 cm - Blade length: approx. 25 cm - Weight: approx. 3900 g incl. Display  - Incl. certificate of authenticity and wooden display with acrylic dome  Please note: We do not sell this product to customers under the age of 18. Please provide your birth date when ordering. We'll also need a copy of your ID-card or passport by email, scan, fax or mail.Manufacturer: Jalic Inc/Valyrian Steel, 2011, Dayton Blvd, USA-37415 Chattanooga, TN, chris@.jalic.com Person responsible: Battle-Merchant Wacken GmbH & Co. KG, Gehrn 4, 25596 Wacken Contact: info@battlemerchant.com Safety note: - Product may have sharp cutting edges. Improper or careless use can lead to injuries.

German Bollock with Leather Sheath, 15th century This beautiful late medieval dagger is based on an original early 15th c. piece from Germany. This particular type of dagger, known as bollock dagger, ballock dagger or kidney dagger, owes its quite peculiar name to the characteristic shape of its hilt that terminates at the guard with two distinctive spherical / egg-shapes lobes or bulges. This reproduction features a single-edged, unsharpened steel blade that tapers evenly from the guard to an acute point. The octagonal grip is carved from one single piece of wood and the flat steel pommel is adorned with a decorative brass plate. The dagger comes complete with a vegetable tanned, hand-dyed leather sheath equipped with a brass chape and a belt loop. This dagger is designed as a collector’s or decoration/display piece. Details: - Blade material: steel (not stainless), blunt edge, sharp tip - Handle material: wooden grip, steel guard and pommel, brass pommel cap - Overall length: approx. 46 cm - Blade length: approx. 31.5 cm - Weight: approx. 500 g (approx. 600 g with sheath) - Vegetable tanned leather sheath with brass chape and belt loop Specs may slightly vary from piece to piece. The steel used here is not rust-proof and might show slight surface tarnishing in places. We recommend you to maintain the blade on a regular basis, for example using Ballistol Universal Oil, which is ideally suited for steel care. As wood is a natural products, variations in colour and grain are quite normal. Each dagger has thus its own very unique handle and above pictures are for reference only. Please note: We do not sell this product to customers under the age of 18. Please provide your birth date when ordering. We'll also need a copy of your ID-card or passport by email, scan, fax or mail. Manufacturer: Battle-Merchant Wacken GmbH & Co. KG, Gehrn 4, 25596 Wacken Contact: info@battlemerchant.com Safety note: - Product may have sharp cutting edges. Improper or careless use can lead to injuries.

German Dagger Pistol, Replica Decoration pistol with articulated mechanism – NOT FUNCTIONAL – Replica of a German dagger pistol. As the name implies, it is a dagger with a flintlock pistol mounted in its centre. This combination of dagger or knife and pocket pistol was an oddity that was rather custom-made. In the Age of Sail, pistol / pistol knives were used by naval forces and pirates alike. Their dual function as a firearm and an edged melee made them particularly useful in close quarters combat. The handle scales of this beautiful dagger / muzzleloader replica with boxlock flintlock mechanism are made of resin (imitation wood). The metal elements are richly adorned with lion and plant motifs. The blunt blade with pointed tip has approx. 1 mm thick edges. Our firearm replicas are solely intended for re-enactment and decorative purposes. Although the mechanism is fully articulated, this reproduction is not capable of firing. A beautiful item for every collection and an indispensable accessory for re-enactors. Details: - Material: resin (faux wood), metal - Overall length: approx. 42 cm - Blade length: approx. 28.5 cm - Blade width at guard: approx. 3 cm - Blade thickness: approx. 5 mm (edges approx. 1 mm) - Guard length: approx. 10 cm - Weight: approx. 720 g Specs may slightly vary from piece to piece. Please note: We do not sell this product to customers under the age of 18. Please provide your birth date when ordering. We'll also need a copy of your ID-card or passport by email, scan, fax or mail. Manufacturer: Battle-Merchant Wacken GmbH & Co. KG, Gehrn 4, 25596 Wacken Contact: info@battlemerchant.com

German Quillon Dagger with Leather Sheath, 16th century The late medieval / Renaissance quillon dagger owes its name to the shape of its guard, which was essentially a scaled down version of the crossguards (double quillons) found on the swords of the time. Often equipped with a protruding ring or half ring on one side of the guard, this particular type of dagger was devised to parry or block enemy blades in close-quarters combat, and its sharply tapered blade with pointed tip was ideal for piercing padded and chain mail or stabbing the opponent through the joints of his plate armour. Usually carried as a companion sidearm to a or rapier, and appearing in many variations, the parrying dagger enjoyed great popularity with knights, landsknechte (the notorious, mostly German mercenaries of the late 15th and 16th c.) and even wealthy townsmen. The handsome thrusting we offer here is based on an original early 16th c. example (approx. 1510-1540) that belongs to the collection of the Metropolitan Museum of Art (The Met) in New York City. The blade is made of EN45 spring steel, has a diamond cross-section and tapers to a needle-sharp point. The cutting edges are not sharpened and the tang is screwed to the pommel (top nut). The artfully crafted guard and pommel are made of antiqued brass and the grip itself is carved from wood. The guard features slightly flared quillons and a B-shaped side ring, and the hexagonal pommel flares upwards to a flat, ornate butt cap. This landsknecht dagger / knightly dagger comes complete with a vegetable-tanned, neatly stitched leather sheath equipped with nicely adorned antiqued brass fittings (a chape terminating in a button finial and a throat with articulated suspension rings for attachment to a belt). This Renaissance dagger is designed as a collector’s or decoration/display piece and, besides its quality as a collectible, it is also perfectly suited as a prop, e.g. to complete your costume. Details: - Material: EN45 spring steel blade (high carbon steel, not stainless), antiqued brass pommel and guard with parrying ring, wooden handle - Overall length: approx. 36.5 cm - Blade length: approx. 25 cm - Blade thickness: approx. 4.5 mm / 3.7 mm (cutting edges approx. 0.6 mm) - Hilt length: approx. 11.5 cm (grip approx. 8 cm) - Max. blade width: approx. 1.9 cm - Point of balance: approx. -0.5 cm (on the grip, just behind the guard) - Incl. genuine leather sheath with antiqued brass fittings and carrying rings - Weight without sheath: approx. 210 g - Weight with sheath: approx. 270 g Specs may slightly vary from piece to piece. The steel used here is not rust-proof and might show slight surface tarnishing in places. We recommend you to maintain the blade on a regular basis, for example using Ballistol Universal Oil, which is ideally suited for steel care. Please note: We do not sell this product to customers under the age of 18. Please provide your birth date when ordering. We'll also need a copy of your ID-card or passport by email, scan, fax or mail. Manufacturer: Battle-Merchant Wacken GmbH & Co. KG, Gehrn 4, 25596 Wacken Contact: info@battlemerchant.com Safety note: - Product may have sharp cutting edges. Improper or careless use can lead to injuries.

König Gustav Adolf von Schweden (1594-1632) beherrschte Schweden von 1611-1632. Bei der Schlacht von Lützen besiegte sein Heer die Armee Albrecht von Wallensteins, er selbst erlag jedoch einer tödlichen Verletzung. Der Gustav Rapier und der passende Linkshanddolch sind Repliken des Originals und eines Königs würdig. Die geschmiedete Klinge besteht aus Kohlenstoffstahl, die Scheide ist aus Leder. Diesen Rapier und den passende Linkshanddolch bietet CAS/Hanwei auch mit "Practical" Klinge für das sichere Fechttraining. Ebenso erhältlich ist die "normale" Version des Rapiers mit passendem Linkshanddolch. Dieser Doch hat eine scharfe Klinge. Die Abgabe dieses Artikels an Personen unter 18 Jahre ist nicht zulässig. Wir benötigen daher einen Altersnachweis per E-Mail oder Brief. Sicherheitshinweis:- Das Produkt kann scharfe Schnittkanten aufweisen. Unsachgemäßer oder unvorsichtiger Gebrauch kann zu Verletzungen führen.

Begleiter des Italienischen Langschwertes von Cold Steel Die Ära des Langschwertes umfasste fast drei Jahrhunderte (von ca. 1350 bis 1650), und dies zweifelsohne nur weil sie so gut funktionierten. Es besaß eine charakteristische kreuzförmige Griffpartie und eine lange, zweischneidige Klinge und war somit gleichermaßen geeignet sowohl leichten, als auch schwer gerüsteten Widersachern wirksam entgegenzutreten. Man sieht, diese besonders lange Klinge bot die nötige Reichweite und den starken Hebel für kraftvolles Zustechen, Schneiden und Hacken während die lange Parierstange und der schwere Knauf nützlich waren, um sich einzuhaken, zu schlagen und zu zerschmettern. Wenn es galt schwere Platterüstung zu durchdringen, waren Schwerthiebe mit der Klinge nicht sonderlich effektiv, und wurden oft Zugunsten der so genanten Halbschwert-Technik unterlassen. Bei dieser für das Spätmittelalter typischen Kampfart, lag eine Hand des Schwertkämpfers auf dem Griff und die andere umfasste die Klinge vor der Parierstange, um so die Schwertspitze mit gut gezielten, kräftigen Stichen durch die Lücken und Gelenke einer Ritterrüstung zu dringen. Diese Rekonstruktion von Cold Steel ist nach Vorbild der italienischen Schwertgestaltung entworfen. Die Klinge und der Balancepunkt wurden eher für Stoßattacken konzipiert, aber auch die beiden Schneiden sind erstaunlich effektiv und können recht grausame Hiebe ausrichten. Der einfach gestalte, kreuzförmige Griffbereich mit seiner langen, nach vorne gebogenen Parierstange, der mit Leder bezogene Holzgriff sowie der ausgleichende Fischwanzknauf bieten darüber hinaus alle Möglichkeiten des Schwertkampfes. Das italienische Langschwert ist schnell wie eine Froschzunge, tödlich im Kampf und robust wie ein Panzer. Zusätzlich erhältlich ist der Begleitdolch für das Italienische Langschwert: der italienische Dolch. Da das Italienische Langschwert leicht und sehr gut austariert ist, um es nur mit einer Hand zu führen, bietet Cold Steel einen Dolch als Begleiter anstelle eines Schildes, Targe, oder Bucklers. In den Abmessungen verkleinert, ist der Dolch äußerlich fast identisch mit seinem großen Bruder und seine spitze, doppelschneidige Klinge begünstigt gezielte Attacken mit der Dolchspitze und ist stark genug, um jeden Schwertstreich zu parieren. Sowohl Schwert als auch Dolch kommen jeweils mit einer lederbezogenen Holzscheide mit Stahlbeschlägen. Details für den Italienischen Dolch: Klingenlänge: ca. 33 cm Gesamtlänge: ca. 49 cm Grifflänge: ca. 16 cm Material der Klinge: 1055 Karbonstahl Gewicht: ca. 485 g Inklusiver einer einer lederbezogenen Holzscheide mit Stahlbeschlägen. Bitte beachten Sie! Die Abgabe an Personen unter 18 Jahre ist nicht zulässig. Bitte geben Sie deshalb Ihr Geburtsdatum in unserem Bestellformular an. Zusätzlich benötigen wir eine Kopie Ihres Personalausweises per E-Mail, Scan, Fax oder Post. Sicherheitshinweis:- Das Produkt kann scharfe Schnittkanten aufweisen. Unsachgemäßer oder unvorsichtiger Gebrauch kann zu Verletzungen führen.

Der Glaube an den beschützenden Löwen entstand vor über 1800 Jahren während der Han-Dynastie. Der Löwe, kämpferisch, mutig, loyal und geschickt war das perfekte Abwehrzeichen zum Schutze von Haus und Herd. Der Löwe wurde wegen seiner Symbolkraft als auch zur Dekoration auf vielen eleganten Skulpturen in reichen Adelshäusern, an den Toren des kaiserlichen Palastes und an den Gräbern der chinesischen Kaiser abgebildet. Die Jade Lion Serie von Cold Steel beansprucht den gleichen, schützenden Ruhm, kombiniert sie doch das zeremonielle Aussehen mit der kampftauglichen Effizienz. Dies macht die Waffen der Jade Lion Serie sowohl für Sammler als auch Schwertkämpfer besonders attraktiv. Das chinesische Motiv eines wachsamen Löwen ist in großer Detailgenauigkeit in den schweren Knauf und die Parierstange aus Neusilber gegossen. Diese bieten einen scharfen Kontrast zu der eleganten, jade-grünen Kordelwicklung des Griffes und den passenden Rosenholzscheiden, die mit hochpolierter, eingefärbter Rochenhaut (Samé) eingeschlagen ist. Die größte Aufmerksamkeit ziehen aber die Klingen auf sich. Sie sind handgeschmiedet aus bestem Damaststahl und fachkundig gehärtet. Das feine, wirbelartige Linenmuster beweist die elegante Schönheit erstklassiger Handwerks- kunst, kombiniert durch die unvergleichbare Stärke des Damaszener Stahls. Jade Lion Dolch: Eine perfekte Verkleinerung des Gims ist der Jade Lion Dolch. Es besitzt das gleiche Design, die gleichen Materialien sind verwendet worden und es spiegelt sich die gleiche exzellente Handwerksarbeit, wie bei seinem größeren Pendant. Er ist perfekt austariert, groß und stark genug um damit allein kämpfen zu können oder Seite an Seite mit seinem großen Bruder. Klingenlänge: ca. 39,37 cm Klingenstärke: ca. 0,64 cm Klingenmaterial: Damast Grifflänge: ca. 14,92 cm Gesamtlänge: ca. 54,29 cm Gewicht: ca. 604,8 g Cold Steel Artikelnummer: 88RLD Bitte beachten Sie! Die Abgabe an Personen unter 18 Jahre ist nicht zulässig. Bitte geben Sie deshalb Ihr Geburtsdatum in unserem Bestellformular an. Zusätzlich benötigen wir eine Kopie Ihres Personalausweises per E-Mail, Scan, Fax oder Post. Sicherheitshinweis:- Das Produkt kann scharfe Schnittkanten aufweisen. Unsachgemäßer oder unvorsichtiger Gebrauch kann zu Verletzungen führen.

Der Katzbalger war die bevorzugte Nahkampfwaffe der Landsknechte Ende des 15. und im 16. Jahrhundert. Sie zeichnen sich durch eine relativ kurze und breite Klinge sowie durch einen s-förmigen Handschutz aus. Maße: Gesamtlänge: ca. 46 cm Klingenlänge: ca. 31 cm Klingenbreite: ca. 5 cm Gewicht: ca. 0,9 kg Die Abgabe dieses Artikels an Personen unter 18 Jahre ist nicht zulässig. Wir benötigen daher einen Altersnachweis per E-Mail oder Brief. Sicherheitshinweis:- Das Produkt kann scharfe Schnittkanten aufweisen. Unsachgemäßer oder unvorsichtiger Gebrauch kann zu Verletzungen führen.

Buy now: King Arthur , Marto Details: - Blade material: AISI 420 stainless steel - Overall length: approx. 45 cm - Blade length: approx. 26 cm - Weight: approx. 870 g - Manufacturer's product no.: 739 King Arthur's dagger, crafted by the artisans and masters of Marto. This dagger is based on the Excalibur interpretations by Marto (item no.: MT-35001, MT-8205) and, like these, is decorated with the main symbols of King Arthur, dragon, shield and crown with cross. This decorative dagger is the perfect addition to your collection. Order now and get a dagger that is second to none! Please note: We do not sell this product to customers under the age of 18. Please provide your birth date when ordering. We'll also need a copy of your ID-card or passport by email, scan, fax or mail. Manufacturer: Battle-Merchant Wacken GmbH & Co. KG, Gehrn 4, 25596 Wacken Contact: info@battlemerchant.com Safety note: - Product may have sharp cutting edges. Improper or careless use can lead to injuries.

Bollock Dagger by Kingston Arms Details:- Blade material: 1566 steel - Handle material: wood - Overall length: approx. 40 cm - Blade length: approx. 26 cm - Handle length: approx. 10.2 cm - Blade thickness at guard: approx. 5.5 mm - Blade thickness at tip: approx. 1.7 mm - Weight: approx. 283 g Kingston Arms proudly presents its first bollock dagger for collectors of Scottish . As the predecessor of the well-known Scottish dirk, this reconstruction reflects the typical shape and feel of used between the 13th and 18th centuries. The bollock dagger was a widely used secondary weapon, complementing and lances. The crossguard was usually made from a single piece, while the grip was crafted from box root (dudgeon), which inspired other less humanly anatomical names for the dagger. This faithful reproduction features an approx. 26 cm long blade with a short stainless steel crossguard. The approx. 10.2 cm long wooden grip has a hexagonal design and is fitted with a stainless-steel cap. The dagger comes with a leather scabbard reinforced with a stainless steel chape and a belt loop on the back for secure carrying. Please note: We do not sell this product to customers under the age of 18. Please provide your birth date when ordering. We’ll also need a copy of your ID-card or passport by email, scan, fax or mail. Specs may slightly vary from piece to piece. - Product may have sharp cutting edges. Improper or careless use can lead to injuries.

Kingston Arms Main Gauche Details:- Blade material: 1566 steel - Overall length: approx. 41.9 cm - Blade length: approx. 27.9 cm - Handle length: approx. 14 cm - Blade width at guard: approx. 2.2 cm - Blade thickness at guard: approx. 5.3 mm - Blade thickness at tip: approx. 2.2 mm - Weight: approx. 369 g The Main Gauche, also known as left-hand , was often used alongside the rapier, offering additional attack and defence possibilities. The “Schools of Fence” that spread throughout Europe during this period therefore taught the use of these two in combination. Stylistically, the main gauche was often matched to the rapier, but it also had additional features that increased its effectiveness further. The brown cord wrapped grip fits comfortably in the hand and offers enough space to wear fencing gloves if desired. Please note: We do not sell this product to customers under the age of 18. Please provide your birth date when ordering. We’ll also need a copy of your ID-card or passport by email, scan, fax or mail. Specs may slightly vary from piece to piece. - Product may have sharp cutting edges. Improper or careless use can lead to injuries.

Dekorative Replik mit handgeschmiedete Klinge aus Kohlenstoffstahl. Dieses Messer ist ein Nachbau eines sogenannten schwarzen "Commando Knife", der von den englischen Truppen "Royal Marines" im zweiten Weltkrieg verwand wurnde. Im Gegensatz zu den Originalen ist dieses "Kommando Messer" NICHT scharf! Gesamtlänge: ca. 30 cm Klingenlänge: 18 cm max. Klingenbreite: 2,8 cm Achtung! Die Abgabe an Jugendliche unter 18 Jahre ist nicht zulässig. Bitte geben Sie deshalb Ihr Geburtsdatum in unserem Bestellformular an. Zusätzlich benötigen wir eine Kopie Ihres Personalausweises per E-Mail, Scan, Fax oder Post. Sicherheitshinweis:- Das Produkt kann scharfe Schnittkanten aufweisen. Unsachgemäßer oder unvorsichtiger Gebrauch kann zu Verletzungen führen.

Leween Pugio, Roman The main of the legionaries of Rome was the dagger known as the "Pugio ", which was carried on the left side of the belt next to the thrusting (gladius). The Pugio has a broad, double-edged blade. This type of weapon was developed on the Iberian Peninsula around the 2nd century BC. From thereon, it became part of Roman military equipment. It was the successor to the Parazonium, and stayed in use until the 3rd century. This replica has a classic, wide blade with a groove. The handle consists of several layers of wood and metal, which are skilfully riveted together. The dagger sheath is made of brass. There are 4 support rings on the brass frame of the scabbard for attachment to the belt. This Pugio has blunt cutting edges and a rounded tip.Key features: - True to the original - With brass scabbard Details: - Blade material: EN45 sping steel - Overall length: approx. 37.5 cm - Blade length: approx. 25 cm - Handle length: approx. 12.5 cm - Weight: approx. 350 g Specs may slightly vary from piece to piece. Please note: We do not sell this product to customers under the age of 18. Please provide your birth date when ordering. We'll also need a copy of your ID-card or passport by email, scan, fax or mail. - Product may have sharp cutting edges. Improper or careless use can lead to injuries.