Asiatische Schwerter
APOC Atrim Survival Wakizashi Details:- Blade material: 9260 spring steel - Handle material: G10 - Rockwell hardness: 56 HRC - Overall length: approx. 71.8 cm - Blade length: approx. 47 cm - Handle length: approx. 21 cm - Point of balance: approx. 5.1 cm from the guard - Blade width at guard: approx. 4 mm - Blade thickness at guard: approx. 6 mm - Weight: approx. 850 g The APOC Survival Wakizashi is a modern, tactical short featuring a classically Japanese-inspired blade profile. Designed by Gus Trim, it combines a functional design with high-quality craftsmanship. The approx. 47 cm long full-tang-blade allows for clean cuts and controlled strikes. The approx. 21 cm G10 handle scales are flush-riveted, providing excellent comfort even during extended use by effectively reducing pressure points and the risk of blistering. An integrated hook in the guard helps prevent the fingers from slipping onto the cutting edge. With an overall length of approx. 74.8 cm and a weight of around 850 g, the wakizashi offers a well-balanced combination of stability, control and agility. The black, textured fibreglass sheath is mounted on a MOLLe-compatible Kydex platform, allowing for versatile carry options on a belt or other gear. Four slots provide additional flexibility for belt or sling carry setups. A drainage hole at the end of the sheath ensures reliable water drainage in wet environments. Please note: We do not sell this product to customers under the age of 18. Please provide your birth date when ordering. We’ll also need a copy of your ID-card or passport by email, scan, fax or mail. Specs may slightly vary from piece to piece. - Product may have sharp cutting edges. Improper or careless use can lead to injuries.
Black Tanto (Negro Sencillo), Marto Simple Black Tanto made of stainless steel, which like a katana has a Tsuba and the traditional handle winding (Tsukamaki). Tantos are combat knives with blade lengths of up to 30 cm. They were worn on the belt (obi) and used in close combat. Details: - Material: stainless steel AISI 420 - Overall length: approx. 45 cm - Blade length: approx. 27 cm - Handle length: approx. 12.5 cm - Weight: approx. 400 g High-quality Tanto of the exclusive collection "Oriental " by Marto. Certificate of origin and quality. Made in Toledo, Spain. Please note: We do not sell this product to customers under the age of 18. Please provide your birth date when ordering. We'll also need a copy of your ID-card or passport by email, scan, fax or mail. - Product may have sharp cutting edges. Improper or careless use can lead to injuries.
Film - Bride's Katana This sword is based on the sword of Beatrix Kiddo (also known as Black Mamba or The Bride) from the cult movie Kill Bill. In the course of the movie, Beatrix convinces the retired legendary swordsmith Hattori Hanzo to forge a sword for her. Hanzo agrees and works for a month on what is probably his best blade. After handing it over to Kiddo, she sets off for Tokyo to begin her vengeance campaign. The katana offered here has an approx. 72.5 cm long blade made of 1045 high carbon steel with a hamon line engraved in the Shinogi Zukuri style. There is also an engraving of a lion on the edge. The rayskin-lined handle wrapping is made of black faux leather in the classic Hineri-Maki style. The saya has a high-polish finish (Kuroro style), two inlaid decorations and a gold-coloured sageo. The sword comes with a stand, sword sheath, collector's box and care set. This katana is designed as a collector's item or decorative object. Details: - Blade material: 1045 high carbon steel - Handle material: wood, ray skin, imitation leather - Total length: approx. 102 cm - Total length incl. saya: approx. 105.3 cm - Blade length: approx. 72.5 cm - Handle length: approx. 29.5 cm - Weight: approx. 1100 g - Weight incl. saya: approx. 1300 g - Including collector's box, protective cover, stand and care set Please note: We do not sell this product to customers under the age of 18. Please provide your birth date when ordering. We'll also need a copy of your ID-card or passport by email, scan, fax or mail. Sicherheitshinweis:- Das Produkt kann scharfe Schnittkanten aufweisen. Unsachgemäßer oder unvorsichtiger Gebrauch kann zu Verletzungen führen.
Ghost of Tsushima Katana This is a replica of the of Jin Sakai, the protagonist in the video game "Ghost of Tsushima", in which Jin sets out as one of the last surviving samurais to free the island of Tsushima from the Mongol invaders. On his journey, he is often put to the test, as not infrequently he must choose between the samurai code of honour and the safe rescue of the people of Tsushima. Details: Blade steel: 1045 carbon steel Total length: approx. 102 cm Blade length: approx. 72.5 cm Handle length: approx. 28 cm Handle material: wood, plastic, cotton Weight without scabbard: approx. 1.1 kg Please note: This item is only for sale to persons over 18 years of age. Please enter your date of birth in our order form. In addition, we need a copy of your identity card/driving licence or similar by e-mail, scan, fax or post. Translated with www.DeepL.com/Translator (free version) Sicherheitshinweis:- Das Produkt kann scharfe Schnittkanten aufweisen. Unsachgemäßer oder unvorsichtiger Gebrauch kann zu Verletzungen führen.
case for two swords (medium), by Paul Chen Although the Paul Chen sword cases are primarily designed for the martial artist who carries katana and/or bokken to and from the dojo, they are equally at home with any sheathed sword with an overall length under 50 in. (approx. 127 cm). Of course, most European swords with straight blades fit perfectly into these bags as well. They are available in two sizes: medium for 2 swords (Product No. OH2159) and large for 3 swords (Product No. OH2158). The bags are made of black, heavy-duty fabric with leather reinforcing. A shoulder strap and carrying handle provide travelling convenience. Each case has two zippered inside compartments for the swords and an outer compartment for maintenance supplies. These bags are perfect for those who travel frequently with their swords across country or across town. A very useful accessory - not only to carry Hanwei swords. Made by Hanwei. Key features: - Heavy fabric - Maintenance pocket - Shoulder strap Details: - Sword bag for 2 swords (medium) - Overall length: approx. 132.7 cm (suitable for swords with a total length up to 127 cm) - Manufacturer's product no.: OH2159 - Large version for three swords also available (Product No. HN-OH2158).
Tactical TantoA modern Samurai Tactical knife Hanwei´s Tactical Tanto is an updated interpretation of the Samurai fighting knife. It is a classic blade with modern construction, based on the blade geometry and superb cutting ability of the Paul Chen Raptor series Tanto, but with full-tang construction for ultimate blade strength. The 5160 high carbon spring steel blade is plasma-coated for corrosion protection and the checkered Kraton handle provides a sure foul-weather grip. The fiberglass scabbard construction avoids water absorption and reduces carrying weight, while several lanyard holes and the included Paracord provide carrying and backpack attachment options. The matching Tactical Katana (Product no. SH2462) and Tactical Wakizashi (Product no. SH2432) are also available to complete your collection. Made by Hanwei. Key features: - Plasma-coated blade - Kraton handle Details:- Blade material: 5160 high carbon steel - Overall length: approx. 42.5 cm - Blade length: approx. 27.9 cm - Handle length: approx. 12.1 cm - Weight: approx. 383 g - Manufacturer´s product no.: SH2483 Specs may slightly vary from piece to piece. Please note: We do not sell this product to customers under the age of 18. Please provide your birth date when ordering. We'll also need a copy of your ID-card or passport by email, scan, fax or mail. - Product may have sharp cutting edges. Improper or careless use can lead to injuries.
Honshu Aizu Ring Fighter Black Tanto Knife This updated interpretation of United Cutlery's Honshu Aizu Ring Fighter features a hefty tanto blade crafted of rock-solid 7Cr13 stainless steel with an anodized, non-reflective black coating. The rubberized handle provides a secure, non-slip grip with contoured finger notches for a supreme grip you can count on. The Honshu Aizu Ringed Tanto offers the power and size of a traditional fighter with the tactical applications of a karambit, giving you an impressive package at an unbelievable value. Delivery includes an embossed leather sheath. Details: - Material: black-coated 7Cr13 stainless steel blade, rubberized handle - Overall length: approx. 30.8 cm - Incl. leather sheath - Manufacturer's product no.: UC3073 Please note: We do not sell this product to customers under the age of 18. Please provide your birth date when ordering. We'll also need a copy of your ID-card or passport by email, scan, fax or mail. - Product may have sharp cutting edges. Improper or careless use can lead to injuries.
Japanese Bag with Peacock Pattern, Paul Chen This sword bag with its peacock pattern provides added protection and style to the otherwise black padded cases used when transporting swords. These bags are particularly convenient when carrying multiple swords in order to keep sayas and metal fittings from being damaged in transit. They are also perfect for keeping swords in pristine condition when in storage. The top is simply folded over and the extra-long cords tied off below the guard of the sword to secure the bag. Made by Hanwei. Key Features: - High-quality woven bag and tassels - Adds a touch of style to your sword collection - Additional padding for storage or transportation of samurai swords Details: - Overall length: approx. 138 cm - Width: approx. 12 cm - Weight: approx. 200 g - Manufacturer's product no.: OH2479 Sicherheitshinweis:- Das Produkt kann scharfe Schnittkanten aufweisen. Unsachgemäßer oder unvorsichtiger Gebrauch kann zu Verletzungen führen.
Japanese Bag with Stripe Pattern, Paul Chen This sword bag with its stripe pattern provides added protection and style to the otherwise black padded cases used when transporting swords. These bags are particularly convenient when carrying multiple swords in order to keep sayas and metal fittings from being damaged in transit. They are also perfect for keeping swords in pristine condition when in storage. The top is simply folded over and the extra-long cords tied off below the guard of the sword to secure the bag. Made by Hanwei. Key Features: - High-quality woven bag and tassels - Adds a touch of style to your sword collection - Additional padding for storage or transportation of samurai swords Details: - Overall length: approx. 138 cm - Width: approx. 12 cm - Weight: approx. 200 g - Manufacturer's product no.: OH2478 Sicherheitshinweis:- Das Produkt kann scharfe Schnittkanten aufweisen. Unsachgemäßer oder unvorsichtiger Gebrauch kann zu Verletzungen führen.
Traditional maintenance kit for Japanese swords, by Hanwei Hanwei's traditional maintenance kit contains blade oil, rice paper (nuguigami), an oiling cloth, a powder ball for blade polishing (uchiko), a brass awl and hammer (mekuginuki) and saya shimming veneer. The kit is delivered in a fitted wooden box. Full maintenance and handling instructions are included. Details: - All traditional items included - Attractive wooden box - Manufacturer's product no.: OH1003 Sicherheitshinweis:- Das Produkt kann scharfe Schnittkanten aufweisen. Unsachgemäßer oder unvorsichtiger Gebrauch kann zu Verletzungen führen.
Jian Carrying Bag by Paul Chen This bag is very strongly made in a heavy Cordura fabric with leather reinforcing. It will hold any single-handed Jian or similar length straight sword. It is equipped with a carrying handle, a shoulder strap and an accessory pocket. Made by Hanwei. Key features: - Will hold any one-handed Jian up to approx. 108 cm overall length - 19.5 x 12.7 cm accessory pocket - Heavy Cordura fabric Details: - Overall length: approx. 111.8 cm - Weight: approx. 200 g - Manufacturer's product no.: OH2280 The sword pictured here is NOT included in the delivery!
John Lee Aikuchi Tanto Hand-forged Samurai from the John Lee series Masterpieces of asian swordcraft - Handforged from carbon steel and traditionally hardened - The blades were folded 12 times (8000 layers) and display lovely damascus properties - The hilt (tsuka) is made of wood and covered in real fish skin (same) - The hilt is wrapped (tsuka-ito) in traditional black cotton - There are decorative grip swells (menuki) - The hilt (tsuka) is anchored to the blade with bamboo pins (mekugi) - The scabbard is made of wood - The blade has a brass collar (habaki) so it won't rattle in the scabbard JOHN LEE Aikuchi Tanto The Aikuchi tanto traditionally has no hand guard (tsuba). It's remarkable feature is the blade shape (shinogi-zukuri) also used frequently in japanese pole (naginata). Each sword includes an authenticity seal and comes in a premium padded wooden box. Details: - Total length: approx. 50 cm - Blade length: approx. 32 cm - Hilt length: approx. 17.5 cm - Blade curve (sori): approx. 9 mm - Weight without scabbard: approx. 0.5 kg - Weight with scabbard: approx. 0.75 kg Please note: We do not sell this product to customers under the age of 18. Please provide your birth date when ordering. We'll also need a copy of your ID-card or passport by email, scan, fax or mail. - Product may have sharp cutting edges. Improper or careless use can lead to injuries.
John Lee Imori Katana Masterpiece of Asian forge-craft - The sharpened blade is hand-forged from Carbon steel (not stainless) and hardened - The wooden hilt (Tsuka) is covered with original ray skin (Same) - The tight hilt-wrapping from dark blue cotton has been done in traditional Katate-Maki-style - The fittings (Tsuba, Fuchi, Menuki, Kashira) show a golden newt - The handle-end is particularly long and fastened to the hilt with 2 pins of bamboo (Mekugi) - The scabbard (Saya) is made of wood. - The blade collar (Habaki) is made of brass - Manufacturing followed examples of museums Imori is the name for the Japanese (alpine) newt. The ornamental newts at the fittings are unmistakeably and give the , which otherwise is kept plainly, its name. Details: - Blade material: carbon steel - Blade length to Tsuba: approx. 71 cm - Total length without scabbard: approx. 100 cm - Hilt length: approx. 28.5 cm - Weight without scabbard: approx. 1.3 kg - Weight with scabbard: approx. 1.5 kg Please note: We do not sell this product to customers under the age of 18. Please provide your birth date when ordering. We'll also need a copy of your ID-card or passport by email, scan, fax or mail. - Product may have sharp cutting edges. Improper or careless use can lead to injuries.
John Lee Kei-Ben-Iaito Masterpiece of Asian forge-craft - Blade is hand-forged from stainless steel and hardened - Blunt blade includes a fuller (Bo-Hi) - Hilt (Tsuka) is made from wood and covered with original ray (Same) skin - Traditional hilt wrapping (Tsuka-Ito) from cotton - Tsuba from zinc-aluminium-casting pictures a flower-motif - Two pins (Mekugi) attached to the hilt - Sheath (Saya) from wood - Blade collar (Habaki) from brass - Manufactured following historical examples laido is a modern Japanese martial art, in which -drawing movements and attack-techniques in exactly defined forms (Kata) are practised, usually using a Iaito, a blunt practical sword. The main emphasis in laido is on the untity of body, mind and sword (Ki-Ken-Tai-Ichi). The ultimate mastership was reached in controlling all combat situations without even drawing the sword. The name Kei-Ben describes the sword’s simple and convenient form. Details: - Blade length to Tsuba: approx. 73.5 cm - Total length without sheath: approx. 101 cm - Hilt length: approx. 27 cm - Weight without sheath: approx. 1100 g - Weight with sheath: approx. 1350 g This sword will be delivered with a seal to guarantee the originality. You’ll get this sword wrapped in a cloth bag.
John Lee Musashi Ichi Katana Hand-forged samurai from the John Lee series Masterpieces of asian swordcraft - handforged from carbon steel and traditionally hardened - the sharpened blade has a fuller for weight reduction - the handle (tsuka) is made of wood and covered in real fish skin (same) - the hilt is wrapped (tsuka-ito) in traditional black cotton - there are two decorative grip swells (menuki) - the hilt (tsuka) is anchored to the blade with bamboo pins (mekugi) - the scabbard (saya) is made of wood - the blade has a brass collar (habaki) so it won't rattle in the scabbard - this sword was crafted following museum originals JOHN LEE Musashi Ichi Tanto Miamoto Musashi (1584-1645) was one of Japans most imposing samurais, often called the best sword fighter of all time. He was a master artist and craftsman who founded his own school of tsuba manufacture, most well-known for the simple double-oval tsuba. Details: - Blade material: carbon steel - total length: approx. 103.5 cm - blade length: approx. 73 cm - hilt length: approx. 31 cm - blade curve (sori): approx. 18-20 mm - weight without scabbard: approx. 1 kg - weight with scabbard: approx. 1.25 kg Please note: We do not sell this product to customers under the age of 18. Please provide your birth date when ordering. We'll also need a copy of your ID-card or passport by email, scan, fax or mail. - Product may have sharp cutting edges. Improper or careless use can lead to injuries.
John Lee Musashi Ichi Wakizashi Hand-forged samurai from the John Lee series Masterpieces of asian swordcraft - handforged from carbon steel and traditionally hardened - the sharpened blade has a fuller for weight reduction - the hilt (tsuka) is made of wood and covered in real fish skin (same) - the hilt is wrapped (tsuka-ito) in traditional black cotton - there are two decorative grip swells (menuki) - the hilt (tsuka) is anchored to the blade with bamboo pins (mekugi) - the scabbard (saya) is made of wood - the blade has a brass collar (habaki) so it won't rattle in the scabbard JOHN LEE Musashi Ichi Wakizashi Miamoto Musashi (1584-1645) was one of Japans most imposing samurais, often called the best sword fighter of all time. He was a master artist and craftsman who founded his own school of tsuba manufacture, most well-known for the simple double-oval tsuba. Details: - total length: approx. 76 cm - blade length: approx. 54 cm - hilt length: approx. 22 cm - blade curve (sori): approx. 15 mm - weight without scabbard: approx. 0.8 kg - weight with scabbard: approx. 1.05 kg Please note: We do not sell this product to customers under the age of 18. Please provide your birth date when ordering. We'll also need a copy of your ID-card or passport by email, scan, fax or mail. - Product may have sharp cutting edges. Improper or careless use can lead to injuries.
John Lee Samurai Grip, Cotton Wrapping Tsuka is the word for Japanese katana or wakizashi grips. These grips have a wrapping which is called tsuka-ito. This sword grip comes complete with fuchi, horsemen-menuki, kashira and cotton wrapping. It features real ray skin. Details: - Overall length: approx. 31 cm - Weight: approx. 150 g Sicherheitshinweis:- Das Produkt kann scharfe Schnittkanten aufweisen. Unsachgemäßer oder unvorsichtiger Gebrauch kann zu Verletzungen führen.
John Lee Samurai Grip, Silk Wrapping Tsuka is the word for Japanese katana or wakizashi grips. These grips have a wrapping which is called tsuka-ito. This sword grip comes complete with fuchi, horsemen-menuki, kashira and silk wrapping. It features real ray skin. Details: - Overall length: approx. 31 cm - Weight: approx. 150 g Sicherheitshinweis:- Das Produkt kann scharfe Schnittkanten aufweisen. Unsachgemäßer oder unvorsichtiger Gebrauch kann zu Verletzungen führen.
John Lee Shirasaya Katana (natural-coloured) Hand-forged samurai from the JOHN LEE series. Masterpieces of Asian forging - The blades of the swords are hand-forged out of 1045 high carbon steel and traditionally hardened. - The sharpened blades are grooved with a Bo-Hi (fuller) for weight reduction. - The handle-ends are particularly long and fastened to the hilt with two bamboo pegs (Mekugi). The swords can thus be fully dismantled. - The blade collars (Habaki) are made of metal. - The hilts and sheaths (Saya) are made of wood. Shirasaya was a specific sword mounting designed to ensure a better preservation of the blade at night or in case of prolonged disuse. The advantage of untreated magnolia wood laid in its low acidity and the absence of further substances likely to damage the blade. It was not post-treated, absorbed the humidity of the sword and channelled it away. The Katana kept dry and rust-free. Shirasaya often bore a signature ('Sayagaki') with specifics on the origin of the blade, such as place and time of forging as well as name of swordsmith and assessor. As the carrying of edged was prohibited by the Emperor by the end of the 19th century, the ornaments and fittings all around the hilt and tsuba were trimmed back, which led to the birth of the Shirasaya design as we know it today. The resemblance of this Katana with a wooden sword or stick would enable its holder to remain unnoticed and to keep carrying it along with him. Details: - Blade material: carbon steel - Hilt length: approx. 28 cm - Blade length: approx. 72.5 cm - Overall length (without sheath): approx. 100.5 cm - Weight (without sheath): approx. 940 g This product is also available in black (Product No. 0106857460) Please note: We do not sell this product to customers under the age of 18. Please provide your birth date when ordering. We'll also need a copy of your passport by email, scan, fax or mail. - Product may have sharp cutting edges. Improper or careless use can lead to injuries.
John Lee Shiro Wakizashi Shiro means "white" and stands among others for purity and holiness, yet also for grief and death in the Japanese culture. The Samurai would wear white under their armours to symbolize their unbending determination to fight to the last. - Blade in Shinogi-Zukuri-style with fuller (Bo-Hi), hand-forged out of 1045 high carbon steel. - Sharpened blade with Hamon line, for a particularly genuine aspect. - White cotton hilt-wrapping in traditional Hineri-Maki-style. - Wooden sheath with white high-gloss lacquer finish. - Long handle-end fastened to the hilt with 2 bamboo pegs (Mekugi). The can thus be fully dismantled. - Made of authentic high-quality materials only, no plastic used. - Blade collar (Habaki) and washers (Seppa) made of brass. - The traditional hilt-wrapping is completed by a genuine ray skin lining. - All ornaments (Tsuba, Fuchi, Menuki, Kashira) made of metal. Scope of delivery: John Lee Shiro Wakizashi incl. protective cloth sheath and appealing collector's box. Each original John Lee sword comes with a seal and a certificate. Details: - Blade material: 1045 high carbon steel - Total length: approx. 76.5 cm - Blade length: approx. 52.5 cm - Handle length: approx. 24 cm - Weight without scabbard: approx. 759 g - Weight with scabbard: approx. 954 g Please note: We do not sell this product to customers under the age of 18. Please provide your birth date when ordering. We'll also need a copy of your ID-card or passport by email, scan, fax or mail. - Product may have sharp cutting edges. Improper or careless use can lead to injuries.
Katana - Black Kusanagi, Sasuke Uchiha, Naruto This katana is a decorative interpretation of the Kusanagi wielded by Sasuke Uchiha in the anime and manga Naruto Shippuden. It has an approx. 68.4 cm long, blunt blade made of high carbon steel. The sword is constructed as a shirasaya, which makes it look like a wooden training sword from the outside. The saya and tsuka are painted black and bear the coat of arms of the Uchiha clan. Kusanagi Sasuke uses the sword for the first time after his training under Orochimaru. He shows great skill with the blade and is even able to link it with his chidori. This decorative katana is the perfect addition to your collection. Details: - Blade Material: high carbon steel - Total length: approx. 93.2 cm - Blade length: approx. 68.4 cm - Handle length: approx. 24.8 cm - Blade thickness: approx. 4 mm - Weight: approx. 525 g - Weight with scabbard: approx. 736 g Specs may slightly vary from piece to piece. Please note: We do not sell this product to customers under the age of 18. Please provide your birth date when ordering. We'll also need a copy of your ID-card or passport by email, scan, fax or mail.
Katana – Kikoku, Trafalgar Law, One Piece This decorative was inspired by the Kikoku wielded by the pirate Trafalgar Law in the anime One Piece. Trafalgar D. Water Law, also known as the Surgeon of Death, is the captain and doctor of the Heart pirates. He is one of the 12 pirates known as the worst generation. His popularity among the fan community is huge and he has emerged as an important character in the story of the anime and manga. Due to its overall length of approx. 134 cm, Trafalgar Law's sword is more akin to the Ōdachi than the classic katana. It has an approx. 94 cm long, slightly sharpened blade made of high carbon steel. The most distinctive feature of this katana is probably the tsuba encased in faux fur. Its approx. 40 cm long tsuka is wrapped in a golden grip band, which is underlaid with imitation ray skin. The handle also has decorative elements made of gold anodised aluminium. The black-coated saya is made of wood, decorated with white crosses and wrapped with a red band near the mouth. This Katana is designed as a collector’s item or decorative object. Details: - Blade Material: high carbon steel - Total length: approx. 134 cm - Blade length: approx. 94 cm - Handle length: approx. 40 cm - Blade thickness: approx. 4 mm - Weight: approx. 970 g - Weight with scabbard: approx. 1293 g Specs may slightly vary from piece to piece. Please note: We do not sell this product to customers under the age of 18. Please provide your birth date when ordering. We'll also need a copy of your ID-card or passport by email, scan, fax or mail. Sicherheitshinweis:- Das Produkt kann scharfe Schnittkanten aufweisen. Unsachgemäßer oder unvorsichtiger Gebrauch kann zu Verletzungen führen.
Katana - Kurikara, Blue Exorcist This is a reference to the Kurikara also known as Kouma sword (Kōmaken) which Rin Okumaura uses in the anime and manga Blue Exorcist. Kurikara in anime / manga The Kurikara was created by Mephisto Pheles as a unique Maken. (Maken are melee endowed with the power of demons. Once the wearer has made a pact with the weapon, he is able to use it to fight demons). The Katana Kurikara has the ability to seal demons within itself. The exorcist Shiro Fujimoto used the sword to seal the demon heart of the half-demon Rin Okumaura. This katana is designed as a collector's item or decorative object and is also ideal as a prop, e.g. to complete your costume or cosplay. Details: - Blade Material: high carbon steel - Total length: approx. 98,5 cm - Blade length: approx. 67 cm - Handle length: approx. 31,5 cm - Blade thickness: approx. 4 mm - Weight: approx. 869 g - Weight with scabbard: approx. 1280 g Specs may slightly vary from piece to piece. Please note: We do not sell this product to customers under the age of 18. Please provide your birth date when ordering. We'll also need a copy of your ID-card or passport by email, scan, fax or mail. Sicherheitshinweis:- Das Produkt kann scharfe Schnittkanten aufweisen. Unsachgemäßer oder unvorsichtiger Gebrauch kann zu Verletzungen führen.
Katana - Sandai Kitetsu This decorative was inspired by the Sandai Kitetsu, which pirate hunter Lorenor Zoro (jap. Roronoa Zoro) wields in the anime One-Piece. The Sandai Kitetsu belongs to the grade swords and thus to the 4th rank of the sword classification within the anime and manga. It has an approx. 67.5 cm long, slightly sharpened blade made of high carbon steel, its tsuka is wrapped with a red grip band. The unconventional decorative elements on the tsuka and saya, like the cross-shaped tsuba, are made of gold-anodised aluminium, The richly decorated red-coated saya is made of wood and has a red grip band wrapped around its middle. History behind the sword It was made by Kozuki Sukiyaki, one of the best swordsmiths in Wano, as an imitation of the Nidai Kitetsu (one of the 21 great grade swords). The term Sandai indicates that the Sandai Kitetsu is the third sword in a series of swords with the name Kitetsu. This katana from the isolated island state of Wa no Kuni somehow found its way into the shop of the arms dealer Ipponmatsu in Loguetown. Zorro went to this shop to replace his two swords, after they were shattered in the fight with Hawk Eyes Mihawk. He discovered the Sandai Kitetsu in a barrel full of rejects and immediately recognised the high quality of the sword. However, when the shop owner realised that his customer had chosen this particular blade, he prohibited him from buying it and then told him about the curse on this katana, which would bring its owner a horrible death. Zoro was intrigued by this concept so he decided to test his luck against the curse; he threw the sword whirling in the air and resolutely stretched out his arm, ready to lose it if fate turned against him. But the blade missed his arm by a hair's breadth, whirled around it and then sank three-quarters into the wooden floor of the shop. Impressed by this nerve-wracking action, Ipponmatsu hurried to the attic of his shop to fetch his family heirloom, the Yubashiri, which he then gifted to the swordsman together with the Kitetsu. Since then, Kiketsu has served the three-sword style swordsman well, although he describes it as his problem child that needs more attention than his other swords. But it proved its worth in his numerous fights against increasingly stronger opponents. Please note that this katana was designed as a collector's item or decorative object. Details: - Blade Material: high carbon steel - Total length: approx. 96 cm - Blade length: approx. 67.5 cm - Handle length: approx. 28.5 cm - Blade thickness: approx. 4 mm - Weight: approx. 706 g - Weight with scabbard: approx. 1035 g Specs may slightly vary from piece to piece. Please note: We do not sell this product to customers under the age of 18. Please provide your birth date when ordering. We'll also need a copy of your ID-card or passport by email, scan, fax or mail. Sicherheitshinweis:- Das Produkt kann scharfe Schnittkanten aufweisen. Unsachgemäßer oder unvorsichtiger Gebrauch kann zu Verletzungen führen.